Showing posts with label Tonerider Hot Classics. Show all posts
Showing posts with label Tonerider Hot Classics. Show all posts

Friday, 14 November 2014

Black Ash Telecaster: She's Done!

Well today I put the finishing touches on the Black Ash Telecaster. I got myself a bone nut blank, shaped it for the Telecaster nut slot and filed the string slots. All in all it took me only about half an hour.





Amazingly, with the nut in and the slot heights adjusted for correct string height at the first fret, the imagined problems with high-action just melted away. I've got the saddles almost right to the bottom of their travel range, but she plays really nicely without any fret buzz. Possibly I could have gone down a little lower with a neck shim, but all in all I'm really happy with how she feels.


The Tru-Oil neck feels nice and fast, and I'm very happy with the Dingotone Guitar Wax on the fretboard. Maybe not as slick as Dr Ducks Axe Wax, but I know that it's keeping the colour locked in. So-too the Tonerider "Hot Classic" pickups sound great. They deliver a real punch when over-driven, and still sound crystal clear in clean mode. With just a touch of reverb this thing sounds just beautiful!



All in all I'm very pleased with this build. I've always wanted a black Tele, and now I have a great sounding, great looking shoe-gazer that I can thrash around the man-cave to my hearts content!

Wednesday, 12 November 2014

Black Ash Telecaster: Shielding for Slugs

Sitting at home today, willing the postman to deliver unto me some shielding tape so that my raft of current builds could continue, I remembered something that I had read in one of the guitar building forums around the place. It was postulated that copper tape sold as "slug barrier" tape could be used just as efffectively to shield a guitar as "sold for purpose" copper shielding. That couldn't be true could it??

Well, with this in mind, and with no postman in sight, I decided to head to my local Masters (big-chain hardware) and see if there was any truth to it - if slug barrier tape could indeed be the answer to my short-term shielding woes. Luckily I managed to find some - 10 metres for 8 bucks. It seemed like a bargain, but would it serve for shielding?


Well, I got the stuff home and proceeded to run a few quick tests to see how it performed. What I really needed to know was:

1. Do overlapping pieces form a continuous conductive surface?
Well, yes they do! I used three lengths stuck down to a piece of pine with a 0.5cm overlap. The surface did indeed register conductivity on my multimeter with a resistance of 0 Ohms. Great so far!

2. Can I solder directly to the tape and does the solder joint conduct?
Well, yes absolutely! The solder went straight on to the tape without any problems at all. A little flux was all that was needed (I use flux-cored solder) and the solder stuck fast with a nice clean joint.

In summary, the barrier tape performed identically to the tape I've been buying from ebay and other suppliers as "double sided conductive" shielding tape. Amazing!

With my 10 metres of tape in hand I dove straight into shielding the pickup and control cavities of the Black Ash Telecaster. The tape went on without any problems at all. Ground wires were easily soldered to the cavity walls to join all the cavities electrically, and then the bridge cavity was joined to the bridge using an underside bare wire.


To wire this beasty I'm using 250K Bournes mini-pots, an Orange Drop capacitor and a 4-way Oak-Grigsby switch. First time I've tried a 4-way switch on a Telecaster, but that's not surprising given it's only the second one I've ever built ;). I'm hoping it will extend the range of tones she will be able to produce - especially the new "series" setting. The circuit for the 4-way wiring scheme can be found on DIYGuitarMods and is shown below.


As it stands, the wiring of the control plate is all but completed (you can see it in the photo above) following the schema in the diagram. All that remains is for me to attach the pickups to the switch and to connect the output jack to its wires. This will be tomorrow's job, in addition to looking at the neck angle. With the bridge now in place it looks suspiciously like a shim is going to be needed - bummer.

Monday, 10 November 2014

Black Ash Telecaster: Moving the Bridge

Well, today I had every intention of getting the remainder of the hardware installed on the Black Ash Telecaster. But, unfortunately, it was not to be. When I did my mock build of the Telecaster prior to starting the finish, I did so with a humbucker in the neck position. As such, the bridge was positioned such that the strings travelled correctly over the poles of the humbucker and up the neck.

Now that I've decided to use a traditional Telecaster pickguard, it turns out the bridge was not perfectly placed to run parallel to the bottom edge of the guard (and wasn't centred either). It looked bloody horrible to tell you the truth. The only thing to do was to move the bridge, and that meant drilling out the original bridge screw holes and plugging them with 6mm oak dowel. Not the best thing to have to do once the finish is completed, but at least the bridge is large enough to cover the damage!


The job was, at least, completed with a minimum of fuss. I sanded the dowel a little with 180 grit paper to make it slide more easily into the 6mm hole, and used Titebond to glue each plug in place. Each plug required a tap with the hammer to get it all the way in, but in the end each sat nice and flush with the top of the guitar.

With the plugs in place, I was able to line up and install both the scratchplate and the control cover. All in all I reckon she's looking pretty bloody good - although in the photo below the bridge is just sitting on top of the plugs.


Once the Titebond has dried overnight, I'll get the bridge lined up again (using both the neck and pickguard as reference this time) and get it screwed down. Then I'll just have the wiring to go. Unfortunately I'm still waiting for shielding tape, so this may still be a while away.

Wednesday, 22 October 2014

Black Ash Telecaster: Tonerider Hot Classics

I have decided to upgrade the pickups on the Black Ask Telecaster build to Tonerider "Hot Classics". I've heard great things about these relatively inexpensive beasties, and so I ordered a set from my friends at Pitbull Guitars. The mailman dropped them on my doorstep this morning!


With a couple of holes drilled in the pickguard to mount the neck pickup (I never liked to idea of having to screw into the guitar body) one half of the upgrade was completed in no time. The bridge pickup, however, was another story!

Unfortunately, the bridge route on the kit was a little smaller than standard. It was perfect for the pickup supplied with the kit, but the Tonerider was just a smidge too big for it. I've had the same issue before - the bridge route on the Surf Telecaster build had to be enlarged to fit the 63 Tele Vintage Wound Professional Series pickup as well. It seems to be a common issue with Chinese made kits!

Anyway, I set about widening the bridge pickup route using my trusty router and the template from Stewmac.


It certainly wasn't the best time to start routing the body - what with the finish just being completed and all - but hey, needs must! I stuck the template down with double sided tape and away I went. It all went pretty smoothly to be honest and the route was complete in no time.


The results are nice and clean (my nice Tru-Oil finish survived!). Now the assembly can continue - as soon as my shielding tape arrives that is!!